zhangwei
/
Train_RFID
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 3 Wiki Activity

重连串口问题优化

This commit is contained in:
Mr.V 2024-04-30 14:51:41 +08:00
parent 6be58c3892
commit b8880f4da7
6 changed files with 179 additions and 567 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

533
src/qt_source/mainwindow.cpp
View File

@ -15,13 +15,12 @@ MainWindow::MainWindow(QWidget *parent)
this->statusBar = new QStatusBar();
this->statusInfo = new QLabel("初始化完成",this);
this->statusBar->addPermanentWidget(this->statusInfo);//显示正常信息
QLabel* statusVersion = new QLabel("开启时间:" + QDateTime::currentDateTime().toString("yy-MM-dd hh:mm"),this);
QLabel* statusVersion = new QLabel("开启时间:" + QDateTime::currentDateTime().toString("yy.MM.dd.hh.mm"),this);
this->statusBar->addWidget(statusVersion);
layout()->addWidget(this->statusBar);
this->setWindowTitle("Matrix_RFID 车号识别程序(勿关！！)");
this->configPath_ = "./config/config.ini";
if (!this->mkLogDir())
{
@ -30,15 +29,7 @@ MainWindow::MainWindow(QWidget *parent)
// 配置文件读取
QString errorMessage = "";
if (!ConfigUtil::readBaseConfig(this->configPath_, errorMessage, this->baseConfig_))
{
this->logError(errorMessage);
}
if (!ConfigUtil::readInterfaceConfig(this->configPath_, errorMessage, this->interfaceConfig_))
{
this->logError(errorMessage);
}
if (!ConfigUtil::readSocketServerConfig(this->configPath_, errorMessage, this->socketServerConfig_))
if (!ConfigUtil::readBaseConfig(g_config_path, errorMessage, this->baseConfig_))
{
this->logError(errorMessage);
}
@ -49,27 +40,13 @@ MainWindow::MainWindow(QWidget *parent)
// 初始化界面上的串口打开参数
this->initComboBox();
this->serial_ = new QSerialPort;
m_pSystemTray=new QSystemTrayIcon(this);
connect(this->ui->openComButton, &QPushButton::clicked, this, &MainWindow::openComClicked);
connect(this, &MainWindow::getRfid_signals, this, &MainWindow::getQueueDataThread);
connect(this, &MainWindow::upRfid_signals, this, &MainWindow::upRfid);
connect(this->ui->testButton, &QPushButton::clicked, this, &MainWindow::readTestInfo);
// 识别状态改变
connect(this, &MainWindow::IdentifyType, this, &MainWindow::IdentifyTypeUpdate);
//最小化信号槽
// 最小化信号槽
connect(m_pSystemTray,SIGNAL(activated(QSystemTrayIcon::ActivationReason)),this,SLOT(on_activatedSysTrayIcon(QSystemTrayIcon::ActivationReason)));
this->logRfidRecvName = "./Logs/rfid_data.txt";
this->recvLog.setFileName(logRfidRecvName);
this->recvLog.open(QIODevice::ReadWrite | QIODevice::Append);
//初始最小化
//this->showMinimized();//最小化
// 设置最大展示数据行数
@ -80,91 +57,52 @@ MainWindow::MainWindow(QWidget *parent)
this->ui->resultTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch);
this->ui->resultTable->verticalHeader()->setMinimumWidth(50);
if (!this->baseConfig_.upResult)
{
QIcon icon("./Fail.ico");
QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
this->ui->upflagLabel->setPixmap(m_pic);
}else{
QIcon icon("./Succ.ico");
QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
this->ui->upflagLabel->setPixmap(m_pic);
}
// if (!this->baseConfig_.upResult)
// {
// QIcon icon("./Fail.ico");
// QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
// this->ui->upflagLabel->setPixmap(m_pic);
// }else{
// QIcon icon("./Succ.ico");
// QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
// this->ui->upflagLabel->setPixmap(m_pic);
// }
if (this->baseConfig_.useSocketServer)
{
// 创建线程
QThread *threadWork = new QThread; // 任务线程
// 初始化LED指示灯
this->upResultType(this->baseConfig_.upResult);
this->tcpClient = new TcpClient(this);
this->tcpClient->moveToThread(threadWork);
this->readComThread = new ReadComThread(&this->queueTrainInfo_, this);
this->readComThread->start();
connect(this, &MainWindow::connect_socket, this->tcpClient, &TcpClient::connectToServer);
// 子线程反馈 socket 到主线程
connect(this->tcpClient, &TcpClient::socketComplete, this, [=](QTcpSocket* tcp, QString ip, quint16 port){
this->tcp_ = tcp;
});
// 接收子线程的消息提示
connect(this->tcpClient, &TcpClient::sendTcpInfoSignals, this, [=](const QString& info){
this->logInfo(info);
this->statusInfo->setText(info);
if (info == "链接服务端超时"
|| info == "未连接Socket服务器"
|| info == "链接服务端失败"
|| info == "服务端断开连接"
|| info == "链接服务端失败")
{
this->videoHasTrain = false;
}
});
// 接收子线程的TCP消息内容展示
connect(this->tcpClient, &TcpClient::getTcpInfoSignals, this, [=](const QString& info){
this->logInfo(info);
});
emit connect_socket(this->socketServerConfig_.server_ip, this->socketServerConfig_.server_port);
connect(this->tcpClient, &TcpClient::comeTrainSignals, this, [=](bool type) {
if (type)
{
this->logInfo("视频车号识别-来车了");
this->videoHasTrain = true;
emit IdentifyType();
}
else
{
this->logInfo("视频车号识别-火车离开了");
this->videoHasTrain = false;
if (this->needIdentify)
emit IdentifyType();
}
});
connect(this->tcpClient, &TcpClient::getDirectionSignals, this, [=](int direction) {
if (this->iDirection == 0)
{
this->logInfo("获得方向判定：" + QString(direction > -1 ? (direction > 0 ? "需识别" : "待定") : "无需上传"));
this->iDirection = direction;
}
});
}
ui->openComButton->click();
this->upResultThread = new UpResultThread(&this->queueTrainInfo_, &this->iDirection, this);
this->upResultThread = new UpResultThread(&this->queueTrainInfo_, this);
this->upResultThread->start();
connect(this, &MainWindow::openCom_signals, this->readComThread, &ReadComThread::openCom);
connect(this, &MainWindow::readTestRfid_signals, this->readComThread, &ReadComThread::readTestInfo);
connect(this->readComThread, &ReadComThread::openComSuccess, this, &MainWindow::openComResult);
connect(this->readComThread, &ReadComThread::closeComSuccess, this, &MainWindow::closeComResult);
connect(this->readComThread, &ReadComThread::comeTrain, this, &MainWindow::comeTrain);
connect(this->readComThread, &ReadComThread::upResultType, this, &MainWindow::upResultType);
// 状态栏信息变化
connect(this->readComThread, &ReadComThread::statusInfoUpdate, this, &MainWindow::statusInfoUpdate);
connect(this->readComThread, &ReadComThread::DebugSignals, this, &MainWindow::DebugSlots);
connect(this->readComThread, &ReadComThread::InfoSignals, this, &MainWindow::InfoSlots);
connect(this->readComThread, &ReadComThread::WarnSignals, this, &MainWindow::WarnSlots);
connect(this->readComThread, &ReadComThread::ErrorSignals, this, &MainWindow::ErrorSlots);
connect(this->upResultThread, &UpResultThread::DebugSignals, this, &MainWindow::DebugSlots);
connect(this->upResultThread, &UpResultThread::InfoSignals, this, &MainWindow::InfoSlots);
connect(this->upResultThread, &UpResultThread::WarnSignals, this, &MainWindow::WarnSlots);
connect(this->upResultThread, &UpResultThread::ErrorSignals, this, &MainWindow::ErrorSlots);
ui->openComButton->click();
}
MainWindow::~MainWindow()
{
this->logInfo("-- 程序退出 --");
this->initParam();
delete ui;
}
@ -184,16 +122,8 @@ void MainWindow::logError(const QString& message) {
LogError << message.toStdString();
ui->textBrowser->append(QString("[Error] [") + this->getSystemTime() + QString::fromStdString("] ") + message);
}
void MainWindow::initParam() {
this->rfidSourceInfo = "";
this->trainTime = "";
if (this->recvLog.isOpen()) this->recvLog.close();
this->vecTrain.clear();
this->needIdentify = false;
this->rnameRfidLog();
this->queue_.clear();
this->iDirection = 0;
void MainWindow::statusInfoUpdate(const QString &info) {
this->statusInfo->setText(info);
}
/**
@ -212,80 +142,6 @@ bool MainWindow::mkLogDir()
return true;
}
bool MainWindow::mkRfidLog()
{
try {
QFileInfo fileInfo(this->logRfidRecvName);
if(fileInfo.isFile())
{
return true;
}
this->recvLog.setFileName(this->logRfidRecvName);
if (!this->recvLog.isOpen())
{
this->recvLog.open(QIODevice::ReadWrite | QIODevice::Append);
}
return true;
} catch (const std::exception &e) {
this->logError("创建、打开RFID原始数据日志文件失败,详细：");
this->logError(e.what());
}
return false;
}
void MainWindow::deleteOldFiles(const QString &path, int days)
{
QDir dir(path);
foreach(QFileInfo fi, dir.entryInfoList(QDir::Files | QDir::NoDotAndDotDot))
{
if((fi.lastModified().addDays(days) < QDateTime::currentDateTime()))
{
QFile::remove(fi.absoluteFilePath());
}
}
}
bool MainWindow::rnameRfidLog()
{
try {
this->recvLog.close();
QFile logFile(this->logRfidRecvName);
QFileInfo fileInfo(logFile);
if (fileInfo.size() == 0) return false;
QString newLogFileName = fileInfo.path() + "/";
newLogFileName.append(QDateTime::currentDateTime().toString("yyyy-MM-dd-hh-mm-ss"));
newLogFileName.append(".txt");
if (!logFile.rename(newLogFileName))
{
this->logError("读取RFID原始数据，存储重命名失败！");
return false;
}
this->deleteOldFiles(fileInfo.path(), 3);
} catch (const std::exception &e) {
this->logError("读取RFID原始数据，存储重命名失败！");
return false;
}
return true;
}
void MainWindow::saveRfidLog(const QString &value)
{
try {
QString logValue = value + "\n";
if (!this->recvLog.isOpen())
{
this->recvLog.open(QIODevice::ReadWrite | QIODevice::Append);
}
this->recvLog.write(logValue.toUtf8());
this->recvLog.flush();
} catch (const std::exception &e) {
this->logError("保存RFID原数据失败");
}
}
/**
* 获取本地所有串口
* @return
@ -302,12 +158,13 @@ QList<QString> MainWindow::getComList() {
/**
* 初始化 comboxBox 组件的值
*/
void MainWindow::initComboBox() {
void MainWindow::initComboBox()
{
// ui->BTBox->setEditable(true);
ui->BTBox->setStyleSheet("QComboBox {background-color: rgb(255, 255, 255);} QComboBox QAbstractItemView::item {min-height: 30px; background-color: rgb(225, 225, 225);}");
ui->BTBox->setStyleSheet("QComboBox {background-color: rgb(255, 255, 255);} QComboBox QAbstractItemView::item {min-height: 30px; background-color: rgb(255, 255, 255); color: rgb(225, 225, 225);}");
ui->BTBox->setView(new QListView());
ui->comBox->setEditable(true);
ui->comBox->setStyleSheet("QComboBox {background-color: rgb(255, 255, 255);} QComboBox QAbstractItemView::item {min-height: 30px; background-color: rgb(225, 225, 225);}");
ui->comBox->setStyleSheet("QComboBox {background-color: rgb(255, 255, 255);} QComboBox QAbstractItemView::item {min-height: 30px; background-color: rgb(255, 255, 255); color: rgb(225, 225, 225);}");
ui->comBox->setMaxVisibleItems(5);
ui->comBox->setView(new QListView());
ui->comBox->addItems(this->comList);
@ -325,9 +182,6 @@ void MainWindow::initComboBox() {
ui->BTBox->setCurrentText(QString::number(this->baseConfig_.baud));
ui->truckEdit->setText(QString::number(this->baseConfig_.trackName));
this->rfidHasTrain = false;
this->videoHasTrain = false;
}
/**
@ -389,8 +243,6 @@ void MainWindow::closeEvent(QCloseEvent *event)
// 验证账号和密码是否正确
if (password == "matrix") {
this->initParam();
this->tcp_->close();
event->accept(); // 关闭窗口
exit(0);
} else {
@ -458,31 +310,8 @@ void MainWindow::openComClicked()
{
if (ui->openComButton->text() == "打开串口")
{
this->serial_ = this->comDetect_.openCom(ui->comBox->currentText(), ui->BTBox->currentIndex());
if (this->serial_ != nullptr)
{
QString logs;
logs.append("串口打开成功\n");
logs.append("串口号:" + ui->comBox->currentText() + "\n");
logs.append("波特率:" + ui->BTBox->currentText() + "\n");
if (this->baseConfig_.havaMagnetSteel)
logs.append("磁钢顺序:" + this->baseConfig_.magnetSteelOrder);
this->isOpenCom = true;
this->logInfo(logs);
this->ui->openComButton->setText("关闭串口");
this->ui->LEDlabel->setStyleSheet("border-radius: 16px;\ "
"background-color: rgba(74, 221, 108, 225);\ "
"border:1px solid rgba(168, 168, 168, 105);");
connect(this->serial_,&QSerialPort::readyRead,this,&MainWindow::readCom); //
connect(this->serial_, &QSerialPort::errorOccurred, this, &MainWindow::serialPort_error);
}
else
{
this->isOpenCom = false;
this->logInfo("串口打开失败！");
}
this->auto_reconnect_serial_ = true;
emit openCom_signals(true);
}
else
{
@ -491,232 +320,66 @@ void MainWindow::openComClicked()
// 验证账号和密码是否正确
if (password == "matrix") {
if (this->comDetect_.closeCom())
{
if (this->needIdentify == true) this->needIdentify = false;
this->isOpenCom = false;
this->logInfo("串口已关闭！");
this->initParam();
this->ui->openComButton->setText("打开串口");
this->ui->LEDlabel->setStyleSheet("border-radius: 16px;\ "
"background-color: red;\ "
"border:1px solid rgba(168, 168, 168, 105);");
}
this->auto_reconnect_serial_ = false;
emit openCom_signals(false);
} else {
QMessageBox::warning(this, "验证失败", "密码不正确！");
}
}
}
/**
* 串口异常退出的槽函数
* @param error
*/
void MainWindow::serialPort_error(QSerialPort::SerialPortError error)
void MainWindow::openComResult(const bool &success)
{
if (error != QSerialPort::NoError)
this->ui->openComButton->setText("关闭串口");
if (success)
{
//关闭串口
this->serial_->close();
this->ui->openComButton->setText("打开串口");
this->logError("串口异常退出，疑似接口松动");
this->ui->LEDlabel->setStyleSheet("border-radius: 16px; \ "
this->ui->LEDlabel->setStyleSheet("border-radius: 16px;\ "
"background-color: rgba(74, 221, 108, 225);\ "
"border:1px solid rgba(168, 168, 168, 105);");
}
else
{
this->ui->LEDlabel->setStyleSheet("border-radius: 16px;\ "
"background-color: red;\ "
"border:1px solid rgba(168, 168, 168, 105);");
this->logInfo("10秒钟后自动尝试重连串口...");
// if (auto_reconnect_serial_) emit openCom_signals(true, 10 * 1000);
}
}
void MainWindow::closeComResult(const bool &success)
{
if (success)
{
this->ui->openComButton->setText("打开串口");
this->ui->LEDlabel->setStyleSheet("border-radius: 16px;\ "
"background-color: red;\ "
"border:1px solid rgba(168, 168, 168, 105);");
}
else
{
this->ui->LEDlabel->setStyleSheet("border-radius: 16px;\ "
"background-color: rgba(74, 221, 108, 225);\ "
"border:1px solid rgba(168, 168, 168, 105);");
}
}
void MainWindow::readCom()
{
try {
if (this->serial_->waitForReadyRead(10)) {
QByteArray data = this->serial_->readAll(); // 读取数据
if(!data.isEmpty())
{
this->queue_.push(QString(data));
emit getRfid_signals();
}
// this->serial_->clear();
data.clear();
}
else
{
this->logError("等待读取超时");
}
} catch(...) {
this->logError("读取串口数据异常！");
}
void MainWindow::comeTrain(const bool &success) {
this->resultTableModel_->clear();
this->resultTableModel_ = this->getStandardItemModel();
}
/**
* @brief:从queue中获取数据
* @param:空
* @return:空
*/
void MainWindow::getQueueDataThread()
{
if (this->queue_.isEmpty()) return;
QString strRfidInfo = this->queue_.getTop();
this->queue_.pop();
this->saveRfidLog(strRfidInfo);
this->tmpRfid.append(strRfidInfo);
if (this->tmpRfid.right(1) != "&")
{
return;
}
this->tmpRfid = this->tmpRfid.replace("&", "");
QStringList rfidSubList = this->tmpRfid.split("@");
this->tmpRfid = "";
auto split_lambda = [=](QString strFirst, QString strOther){
if (strFirst == "0")
{
this->rfidHasTrain = false;
this->logInfo("RFID-火车离开了");
// 关功放信号
// 需要结合 “来车状态”广播消息，确认是否真的车离开了; TODO:没有真离开，则向串口发送 @on& 避免关功放
emit IdentifyType();
}
else
{
// TODO: 此处按照4个磁钢来配置，可能存在一定限制; 另外逻辑需要优化
if (strOther == "000000" // 第一次检测来车时（前提是上一次功放已关闭）
&& (strFirst == this->baseConfig_.magnetSteelOrder.left(1)
|| strFirst == this->baseConfig_.magnetSteelOrder.mid(1, 1)))
{
this->rfidHasTrain = true;
this->logInfo("RFID-来车了");
emit IdentifyType();
}
}
};
for (const auto & i : rfidSubList)
{
if (i.size() == 26 || i.size() == 24)
{
// 车厢信息
QString strTrainInfo = i.mid(1,13);
if (vecTrain.empty() || !vecTrain.contains(strTrainInfo))
{
// 判断是否是车头 车头的第14位是 K或H (慎重)
if (!i.mid(14, 1).contains(QRegExp("^[0-9]+$"))) continue;
// 过滤掉车号中有非数字的
if (!strTrainInfo.right(7).contains(QRegExp("^[0-9]+$"))) continue;
// 因信号不稳定 增加一行过滤 出现读到的编号数据里 空格替代了实际字符的情况
if (strTrainInfo.right(7).simplified().size() < 7) continue;
vecTrain.append(strTrainInfo);
int train_order = vecTrain.size();
this->resultTableModel_->setItem(train_order - 1, 0, new QStandardItem(strTrainInfo));
this->logInfo(QString("第%1节 %2").arg(train_order).arg(strTrainInfo));
// 将接收到的RFID使用@符拼接起来，以待后续上传web
this->rfidSourceInfo.append("@" + i);
QString rfidinfo = this->rfidSourceInfo;
this->rfidSourceInfo = "";
emit upRfid_signals(rfidinfo);
}
}
else if (i.size() == 7)
{
// 不使用磁钢的情况下 过滤掉磁钢信号
if (!this->baseConfig_.havaMagnetSteel) continue;
// 磁钢信号
QString strFirst = i.left(1);
QString strOther = i.mid(1, i.size() - 1);
// 将接收到的RFID使用@符拼接起来，以待后续上传web
this->rfidSourceInfo.append("@" + i);
split_lambda(strFirst, strOther);
}
else if (i.size() == 14) // 特殊情况，来车信号少了&符
{
// 不使用磁钢的情况下 过滤掉磁钢信号
if (!this->baseConfig_.havaMagnetSteel) continue;
for (int j = 0; j < i.size(); j+=7) {
QString rfid_cg = i.mid(j, 7);
QString strFirst = rfid_cg.left(1);
QString strOther = rfid_cg.mid(1, 6);
// 将接收到的RFID使用@符拼接起来，以待后续上传web
this->rfidSourceInfo.append("@" + rfid_cg);
split_lambda(strFirst, strOther);
}
}
}
}
void MainWindow::upRfid(QString rfidInfo)
{
if (!this->baseConfig_.upResult) return;
if (!this->needIdentify && this->baseConfig_.havaMagnetSteel)
{
QIcon icon("./Fail.ico");
QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
this->ui->upflagLabel->setPixmap(m_pic);
return;
}else{
void MainWindow::upResultType(const bool &type) {
if (type) {
QIcon icon("./Succ.ico");
QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
this->ui->upflagLabel->setPixmap(m_pic);
}
QString info = this->vecTrain.back();
int order = this->vecTrain.size();
if (order > this->socketServerConfig_.delayed_upload && this->iDirection == 0)
{
this->iDirection = 1;
}
if (!this->baseConfig_.useSocketServer) this->iDirection = 1;
// info = info.mid(1,info.size() - 1);
TrainInfo trainInfo;
trainInfo.carriageType = info.left(6).simplified().toStdString();
trainInfo.carriageNum = info.mid(6, info.size() - 6).simplified().toStdString();
trainInfo.strOrder = QString::number(order).toStdString();
trainInfo.trainTime = this->trainTime.toStdString();
trainInfo.collectTime = QDateTime::currentDateTime().toString("yyyy-MM-dd HH:mm:ss.zzz").toStdString();
trainInfo.strRfidInfo = rfidInfo.toStdString();
// this->queueTrainInfo_.push(trainInfo);
this->queueTmpTrainInfo_.push(trainInfo);
if (this->iDirection < 0)
{
this->queueTmpTrainInfo_.clear();
return;
}
if (this->iDirection > 0)
{
while (!this->queueTmpTrainInfo_.isEmpty())
{
this->queueTrainInfo_.push(this->queueTmpTrainInfo_.pop());
}
}
}
void MainWindow::IdentifyTypeUpdate() {
if (this->rfidHasTrain || this->videoHasTrain)
{
if (!this->needIdentify)
{
this->logInfo("来车了");
this->mkRfidLog();
this->vecTrain.clear();
this->needIdentify = true;
this->trainTime = this->getSystemTime();
this->resultTableModel_->clear();
this->resultTableModel_ = this->getStandardItemModel();
}
}
else if (!this->rfidHasTrain && !this->videoHasTrain)
{
this->initParam();
this->logInfo("火车离开了");
} else {
QIcon icon("./Fail.ico");
QPixmap m_pic = icon.pixmap(icon.actualSize(QSize(32, 32)));//size自行调整
this->ui->upflagLabel->setPixmap(m_pic);
}
}
@ -740,32 +403,16 @@ void MainWindow::ErrorSlots(const QString &info) {
void MainWindow::readTestInfo()
{
if (this->isOpenCom || ui->openComButton->text() == "关闭串口")
if (this->ui->openComButton->text() == "关闭串口")
{
logWarn("请先关闭串口后进行测试操作！");
return;
}
QString filePath = QFileDialog::getOpenFileName(this, "选择一个文件", QDir::currentPath(), "(*.*)");
if(filePath.isEmpty()){
QMessageBox::warning(this, "打开文件", "选择文件不能为空");
// QMessageBox::warning(this, "打开文件", "选择文件不能为空");
return;
}
// 创建一个QFile对象并打开要读取的文本文件
QFile file(filePath);
if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
logError("无法打开测试文件:" + filePath);
return;
}
logInfo("开始读取测试数据...");
// 将文件内容读入到QStringList中
QTextStream in(&file);
while(!in.atEnd()) {
QString line = in.readLine();
this->queue_.push(line);
emit getRfid_signals();
}
// 关闭文件
file.close();
logInfo("---读取测试数据完毕---");
emit this->readTestRfid_signals(filePath);
}

59
src/qt_source/mainwindow.h
View File

@ -49,10 +49,11 @@
#include <thread>
#include <chrono>
#include "common.h"
#include "ConfigUtil.h"
#include "ComDetect.h"
#include "TcpClient.h"
#include "../threads/UpResultThread.h"
//#include "ComDetect.h"
#include "UpResultThread.h"
#include "ReadComThread.h"
QT_BEGIN_NAMESPACE
@ -62,7 +63,7 @@ using namespace ai_matrix;
class MainWindow : public QWidget
{
Q_OBJECT
Q_OBJECT
public:
MainWindow(QWidget *parent = nullptr);
@ -73,16 +74,10 @@ public:
void logWarn(const QString& message);
void logError(const QString& message);
// 创建日志目录
static bool mkLogDir();
bool mkRfidLog();
void deleteOldFiles(const QString &path, int days);
bool rnameRfidLog();
void saveRfidLog(const QString &value);
bool mkLogDir();
void initParam();
QString getSystemTime();
// 获const 取串口列表&
@ -97,7 +92,7 @@ public:
private:
UpResultThread *upResultThread;
QString trainTime;
ReadComThread *readComThread;
QString logRfidRecvName;
QFile recvLog;
@ -105,41 +100,31 @@ private:
QString configPath_; //
ai_matrix::BaseConfig baseConfig_;
ai_matrix::InterfaceConfig interfaceConfig_;
ai_matrix::SServerConfig socketServerConfig_;
std::string webToken; //授权信息
QSerialPort *serial_; //串口
std::string webToken; //授权信息
// 表格model
QStandardItemModel *resultTableModel_ = nullptr;
// 打开com口标志
bool isOpenCom = false;
bool auto_reconnect_serial_ = false;
// Com口数据读取类
ComDetect comDetect_;
// ComDetect comDetect_;
// com口列表
QList<QString> comList;
// 整列车识别结果存储
QStringList vecTrain;
MQueue<QString> queue_{}; // RFID读取的数据队列
MQueue<TrainInfo> queueTrainInfo_{}; // RFID读取的磁钢信息队列
QString rfidSourceInfo;
QString tmpRfid; //临时存储的RFID原始数据，用于防止接收的数据不完整
// 识别方向正确标志
bool needIdentify = false;
// 视频识别有火车标志（使用socket服务时才有用）
bool videoHasTrain = false;
// RFID识别有火车标志
bool rfidHasTrain = false;
// 是否是需要识别的方向 -1:不识别 0:未确定 1:识别
int iDirection = 0;
// 获取当前时间
QDateTime currentTime_ = QDateTime::currentDateTime();
TcpClient* tcpClient;
private:
QTcpSocket* tcp_ = nullptr;
QStatusBar* statusBar;
QLabel *statusInfo;
@ -156,19 +141,19 @@ private:
void creat_menu();
signals:
void getRfid_signals();
void upRfid_signals(QString rfidInfo);
void connect_socket(QString ip, int port);
void IdentifyType();
void openCom_signals(const bool &type, const int &msec = 0);
void readTestRfid_signals(const QString &filePath);
private slots:
void openComClicked();
void readCom();
void getQueueDataThread();
void upRfid(QString rfidInfo);
void serialPort_error(QSerialPort::SerialPortError error);
void openComResult(const bool &success);
void closeComResult(const bool &success);
void upResultType(const bool &type);
void comeTrain(const bool &success);
void on_activatedSysTrayIcon(QSystemTrayIcon::ActivationReason reason);
void readTestInfo();
void IdentifyTypeUpdate();
void statusInfoUpdate(const QString &info);
void DebugSlots(const QString &info);
void InfoSlots(const QString &info);

81
src/serial/ComDetect.cpp
View File

@ -6,90 +6,63 @@
#include "ComDetect.h"
ComDetect::ComDetect()
{
this->serial_ = new QSerialPort;
}
ComDetect::~ComDetect()
{
this->serial_->deleteLater();
}
QSerialPort* ComDetect::openCom(const QString &com, int baud)
bool ComDetect::openCom(QSerialPort *serial, const QString &com, int baud)
{
try
{
this->serial_->setPortName(com);
serial->setPortName(com);
if (baud == 9600)
{
this->serial_->setBaudRate(QSerialPort::Baud9600);
serial->setBaudRate(QSerialPort::Baud9600);
}
else if (baud == 19200)
{
this->serial_->setBaudRate(QSerialPort::Baud19200);
serial->setBaudRate(QSerialPort::Baud19200);
}
else if (baud == 115200)
{
this->serial_->setBaudRate(QSerialPort::Baud115200);
serial->setBaudRate(QSerialPort::Baud115200);
}
else
{
this->serial_->setBaudRate(QSerialPort::Baud19200);
serial->setBaudRate(QSerialPort::Baud19200);
}
this->serial_->setParity(QSerialPort::NoParity);// 校验
this->serial_->setDataBits(QSerialPort::Data8); //数据位
this->serial_->setStopBits(QSerialPort::OneStop);//停止位，停止位默认选择1位
this->serial_->setFlowControl(QSerialPort::NoFlowControl);// 控制流，默认选择无
this->serial_->setReadBufferSize(1024); // 设置读取的缓冲区1024字节
serial->setParity(QSerialPort::NoParity);// 校验
serial->setDataBits(QSerialPort::Data8); //数据位
serial->setStopBits(QSerialPort::OneStop);//停止位，停止位默认选择1位
serial->setFlowControl(QSerialPort::NoFlowControl);// 控制流，默认选择无
serial->setReadBufferSize(1024); // 设置读取的缓冲区1024字节
if (this->serial_->open(QSerialPort::ReadWrite))
if (serial->open(QSerialPort::ReadWrite))
{
this->serial_->clear(QSerialPort::AllDirections);
this->serial_->setDataTerminalReady(true);
return this->serial_;
serial->clear(QSerialPort::AllDirections);
serial->setDataTerminalReady(true);
return true;
}
}
catch (const std::exception &e)
{
std::cout << e.what() << std::endl;
return nullptr;
}
return nullptr;
}
bool ComDetect::closeCom()
{
this->serial_->clear();
this->serial_->close();
return true;
}
[[deprecated("建议自行定义读取函数")]] void ComDetect::readCom()
{
try {
QByteArray data = this->serial_->readAll(); // 读取数据
if(!data.isEmpty())
{
// this->queue_->push(QString(data));
}
data.clear();
} catch(...) {
}
}
bool ComDetect::writeCom(const QString &str)
{
try
{
this->serial_->write(str.toUtf8());
}
catch (...)
{
return false;
}
return true;
return false;
}
bool ComDetect::closeCom(QSerialPort *serial)
{
serial->clear();
serial->close();
return true;
}

8
src/serial/ComDetect.h
View File

@ -16,16 +16,14 @@ public:
ComDetect();
~ComDetect();
QSerialPort* openCom(const QString &com, int baud);
bool closeCom();
bool writeCom(const QString &str);
bool openCom(QSerialPort *serial, const QString &com, int baud);
bool closeCom(QSerialPort *serial);
private:
QSerialPort *serial_{};
MQueue<QString> *queue_{};
private slots:
[[deprecated("建议自行定义读取函数")]] void readCom();
// [[deprecated("建议自行定义读取函数")]] void readCom();
};

61
src/threads/ReadComThread.cpp
View File

@ -25,6 +25,9 @@ ReadComThread::ReadComThread(MQueue<TrainInfo> *queueTrainInfo,
this->recvLog.setFileName(logRfidRecvName);
this->recvLog.open(QIODevice::ReadWrite | QIODevice::Append);
timer_.setSingleShot(true);
connect(&timer_, &QTimer::timeout, this, &ReadComThread::tryToReconnect);
connect(this, &ReadComThread::getRfid_signals, this, &ReadComThread::getQueueDataThread);
connect(this, &ReadComThread::IdentifyType, this, &ReadComThread::IdentifyTypeUpdate);
connect(this, &ReadComThread::upRfid_signals, this, &ReadComThread::upRfid);
@ -93,15 +96,18 @@ void ReadComThread::run()
{
while (true)
{
QThread::msleep(100);
if (this->auto_reconnect_serial_)
{
QThread::msleep(10 * 1000);
if ((this->serial_ == nullptr || !this->serial_->isOpen()))
{
this->openCom(true, 0);
}
}
QThread::msleep(10 * 1000);
// if (this->auto_reconnect_serial_)
// {
// QThread::msleep(10 * 1000);
// if ((this->serial_ == nullptr || !this->serial_->isOpen()))
// {
// this->openCom(true, 0);
// }
//
// }
}
}
@ -111,10 +117,8 @@ void ReadComThread::openCom(const bool &type, const int &msec)
if (type)
{
this->auto_reconnect_serial_ = true;
this->serial_ = new QSerialPort;
this->serial_ = this->comDetect_.openCom(this->baseConfig_.comName, this->baseConfig_.baud);
if (this->serial_ != nullptr)
this->serial_ = new QSerialPort(this);
if (this->comDetect_->openCom(this->serial_, this->baseConfig_.comName, this->baseConfig_.baud))
{
QString logs;
logs.append("串口打开成功\n");
@ -126,25 +130,26 @@ void ReadComThread::openCom(const bool &type, const int &msec)
this->InfoSignals(logs);
connect(this->serial_,&QSerialPort::readyRead,this,&ReadComThread::readCom); //
connect(this->serial_, &QSerialPort::errorOccurred, this, &ReadComThread::serialPort_error);
this->openComSuccess(true);
emit this->openComSuccess(true);
this->timer_.stop();
this->initParam();
}
else
{
this->comDetect_->closeCom(this->serial_);
this->isOpenCom = false;
this->ErrorSignals("串口打开失败！");
this->openComSuccess(false);
emit this->openComSuccess(false);
this->timer_.start(10*1000);
}
}
else
{
this->auto_reconnect_serial_ = false;
if (this->comDetect_.closeCom())
if (this->comDetect_->closeCom(this->serial_))
{
this->initParam();
this->InfoSignals("串口已关闭！");
@ -152,16 +157,23 @@ void ReadComThread::openCom(const bool &type, const int &msec)
}
else
{
this->closeComSuccess(false);
emit this->closeComSuccess(false);
}
}
}
void ReadComThread::tryToReconnect()
{
if (this->auto_reconnect_serial_)
this->openCom(true);
}
void ReadComThread::readCom()
{
try {
if (this->serial_->waitForReadyRead(10)) {
QByteArray data = this->serial_->readAll(); // 读取数据
if(!data.isEmpty())
{
this->queue_.push(QString(data));
@ -449,14 +461,9 @@ void ReadComThread::serialPort_error(QSerialPort::SerialPortError error)
{
//关闭串口
this->serial_->close();
this->ErrorSignals("串口异常退出，疑似接口松动;");
this->openComSuccess(false);
// this->ui->openComButton->setText("打开串口");
// this->ui->LEDlabel->setStyleSheet("border-radius: 16px; \ "
// "background-color: red;\ "
// "border:1px solid rgba(168, 168, 168, 105);");
this->ErrorSignals("串口异常退出，疑似接口松动;10秒后自动尝试重连...");
emit this->openComSuccess(false);
this->timer_.start(10*1000);
}
}

4
src/threads/ReadComThread.h
View File

@ -28,6 +28,7 @@ private:
MQueue<TrainInfo> queueTmpTrainInfo_{}; // RFID临时信息队列
QSerialPort *serial_; //串口
bool auto_reconnect_serial_ = false;
QTimer timer_;
ai_matrix::BaseConfig baseConfig_;
ai_matrix::SServerConfig socketServerConfig_;
@ -36,7 +37,7 @@ private:
QTcpSocket* tcp_ = nullptr;
// Com口数据读取类
ComDetect comDetect_;
ComDetect *comDetect_;
// 打开com口标志
bool isOpenCom = false;
@ -100,6 +101,7 @@ public slots:
void getQueueDataThread();
void IdentifyTypeUpdate();
void upRfid(const QString &rfidInfo);
void tryToReconnect();
void readTestInfo(const QString &filePath);
};